Field fix / guidePLC / HMI Code & LogicVendor-agnostic (IEC 61131-3)Sorting Classificationindustrial-automation
Weight Classification — PLC Control Template
Shared by TSIMEREZIVO Team · 4 Oct 2026 · 45 views
# Weight Classification — Usage Guide
## Overview
Simple three-band weight classification template using compare instructions and discrete route outputs.
## Commissioning
1. Set `SP_LOW` and `SP_HIGH` from product spec limits
2. Verify each weight band activates the expected route output
3. Add upstream scale diagnostics if the installation requires fault handling
---
## Control Logic — Vendor-Agnostic Pseudocode
# Weight Classification — Logic
## Standards: IEC 61131-3 | ISA-5.1 | ISA-18.2
## Scan Rate: 10ms | Pattern: compare instruction class assignment
```
ROUTINE: WeightClassification
SCAN_RATE: 10ms
// SECTION 1 — COMPARE BANDS
IF SAMPLE_READY THEN
IF WEIGHT_PV < SP_LOW THEN CLASS := 1
ELSIF WEIGHT_PV <= SP_HIGH THEN CLASS := 2
ELSE CLASS := 3
END_IF
END_IF
// SECTION 2 — ROUTE COMMANDS
ROUTE_LOW_CMD := (CLASS = 1)
ROUTE_OK_CMD := (CLASS = 2)
ROUTE_HIGH_CMD := (CLASS = 3)
// SECTION 3 — COUNTS
IF SAMPLE_READY THEN
CASE CLASS OF
1: COUNT_LOW := COUNT_LOW + 1
2: COUNT_OK := COUNT_OK + 1
3: COUNT_HIGH := COUNT_HIGH + 1
END_CASE
END_IF
// SECTION 4 — HMI
HMI_CLASS := CLASS
HMI_WEIGHT := WEIGHT_PV
END_ROUTINE
```
---
## Tag List
```csv
Tag Name,Description,Data Type,Direction,Engineering Unit,Range Min,Range Max,Default Value,Address
SAMPLE_READY,Sample Ready Pulse,BOOL,input,,,,FALSE,DI:0:0.0
WEIGHT_PV,Measured Weight,REAL,input,g,0,5000,0,AI:0:0.0
SP_LOW,Low Classification Threshold,REAL,internal,g,0,5000,90,
SP_HIGH,High Classification Threshold,REAL,internal,g,0,5000,110,
CLASS,Assigned Class,INT,internal,,0,3,0,
ROUTE_LOW_CMD,Low Route Command,BOOL,output,,,,FALSE,DO:1:0.0
ROUTE_OK_CMD,OK Route Command,BOOL,output,,,,FALSE,DO:1:0.1
ROUTE_HIGH_CMD,High Route Command,BOOL,output,,,,FALSE,DO:1:0.2
COUNT_LOW,Low Count,DINT,internal,,0,999999,0,
COUNT_OK,OK Count,DINT,internal,,0,999999,0,
COUNT_HIGH,High Count,DINT,internal,,0,999999,0,
HMI_CLASS,HMI: Assigned Class,INT,output,,0,3,0,
HMI_WEIGHT,HMI: Weight,REAL,output,g,0,5000,0,
```
---
## Alarm Matrix
```csv
Alarm Tag,Condition,Setpoint,Priority,Type,Response,Delay,Auto Acknowledge
ALM_NONE,No active alarms defined for compare-only template,N/A,low,diagnostic,Use upstream scale diagnostics if required.,0s,Yes
```